Child-Resistant Snap Tin
L: 74mm × W: 58mm × H: 20mm
SKU: 760CR-V5
MOQ 5,000 units
- Watertight seal
- CR certified under 16 CFR §1700.20
- FDA food-grade
- Multi-use resealable
- Fits 3-6 pre-rolls
- Full customization inside and out
Description
The Child-Resistant Snap Tin (V5) is TPC's proprietary press-and-snap CR tin, built around a watertight gasket seal, one of the only CR tin formats that protects contents from moisture, humidity, and direct water exposure, not just air. Certified to 16 CFR §1700.20 and tested to ASTM F1272, it fits pre-rolls up to 70mm and doubles as a compact case for edibles, concentrates, and cannabis hardware. At 74mm × 58mm × 20mm, it's a low-profile, pocket-ready format with a large flat lid that gives brand artwork real presence at dispensary.
Watertight, not just airtight
Most CR tins claim airtight. This one is watertight. The integrated rubber gasket creates a seal tight enough to keep contents completely dry under direct water exposure, we put it to the test so you don't have to.
Pre-roll submerged in water inside the sealed tin, comes out completely dry.
Specifications
| SKU | 760CR-V5 |
| Dimensions | L: 74mm × W: 58mm × H: 20mm |
| Material | Tinplate |
| Certification | 16 CFR §1700.20 child-resistant, tested to ASTM F1272 |
| Seal | Watertight rubber gasket, airtight and waterproof |
| Design | Proprietary TPC press-and-snap mechanism |
| Decoration | Offset printing, digital, embossing, spot UV, metallic inks |
| MOQ | 5,000 units |
| Best for | Pre-rolls up to 70mm, edibles, concentrates, carts and hardware |
| Tray options | Plastic, paper, foam or EVA foam, custom printed wax paper liner |
Custom insert trays
Every Snap Tin ships with an insert engineered specifically to your product, not a generic filler. Our team designs and prototypes each tray based on your pre-roll diameter, piece count, or product format before full production begins.
Pre-roll trays
Fits pre-rolls up to 70mm. Standard configurations include 3-pack, 5-pack, and 6-pack, sized to your exact cone diameter, dogwalker, slim, or custom gauge.
Edible and gummy trays
Compartmentalized trays for gummies, chocolates, mints, or capsules, with divider count and spacing matched to your piece size and count.
Cart and hardware trays
Foam inserts cut to your cart or hardware dimensions for a secure fit with no rattling. Works for 510 carts, disposables, and accessories.
Customization options
- Offset printing, digital decoration, embossing, spot UV, and metallic inks
- Custom insert trays engineered to your pre-roll diameter, count, or product format
- Optional custom printed wax paper liner
- Interior lid printing for instructions, storytelling, or cross-selling
- Regulatory text zones, batch info, and warning panel layouts supported
Frequently asked questions
The Snap Tin fits pre-rolls up to 70mm in length. Standard insert configurations hold 3, 5, or 6 pre-rolls depending on cone diameter. Share your pre-roll dimensions and count and we'll engineer the insert tray to your exact spec before production begins.
Yes. The proprietary press-and-snap mechanism is certified to 16 CFR §1700.20, the federal child-resistant packaging standard accepted by cannabis regulators across major U.S. markets, and tested to ASTM F1272. Verify state-specific CR requirements with your compliance team for regulated product programs.
Watertight. The integrated rubber gasket creates a seal that prevents water intrusion, not just air and moisture. We've tested this directly, a pre-roll submerged inside the sealed tin comes out completely dry. This is a meaningful differentiator versus standard CR tins that use only a press-fit lid without a gasket.
Yes. The V5 is the standard format at 74mm × 58mm × 20mm, but custom dimensions are available. The Child-Resistant Snap Tin, Extended (95mm) is available for king-size formats. Contact our team for custom sizing outside standard configurations.
MOQ is 5,000 units. Contact our team for volume pricing or multi-SKU programs running different configurations or decoration variants.
Ready to move forward? Request a quote. Want samples first? Request a Production Readiness Kit.
